Introduction
In 2026, our digital lives are more interconnected than ever. We often find ourselves in situations where a single computer has a high-quality proxy connection, but our other devices—such as iPhones, Android tablets, Nintendo Switches, or even smart TVs—are stuck with restricted or slow local internet. This is where LAN Sharing (Local Area Network Sharing) in Clash Verge Rev becomes a game-changer.
Clash Verge Rev, the modern successor to older Clash clients, offers a streamlined way to turn your PC into a "proxy gateway" for your entire home network. By enabling this feature, any device connected to the same Wi-Fi or Ethernet network can route its traffic through your PC's Clash core, enjoying the same speed and rule-based routing benefits without installing separate software on every device.
Key Benefit
Save device resources and subscription quotas by sharing one stable connection with multiple devices simultaneously.
1Prerequisites for LAN Sharing
Before we dive into the settings, ensure your environment meets the following criteria to avoid connection failures:
- Same Network: All devices must be connected to the same router (same subnet). For example, if your PC is on
192.168.1.5, your phone should be on192.168.1.x. - Stable PC Connection: The host PC running Clash Verge Rev should ideally be connected via Ethernet for the lowest latency.
- Administrative Rights: You may need to modify firewall settings, which requires admin privileges on Windows or macOS.
Note on Public Wi-Fi
LAN sharing is often disabled on public or hotel Wi-Fi networks due to "AP Isolation." This guide works best for home or office environments.
2Enabling LAN Sharing in the UI
The first step is to tell the Clash core to listen for connections from other IP addresses, not just the local machine (localhost).
- Open Clash Verge Rev and navigate to the Settings tab on the left sidebar.
- Look for the Clash Core or General section.
- Locate the toggle labeled Allow LAN (or "Allow LAN Connections") and switch it to ON.
- Note the Port numbers. By default, Clash usually uses
7890for Mixed (HTTP/SOCKS5) traffic. - Find your PC's Local IP Address. You can see this by hovering over the "Allow LAN" icon in some versions, or by using the terminal.
3Windows Firewall Configuration
By default, Windows is very protective. Even if Clash is ready to share, the Windows Firewall will likely block incoming requests from your phone or TV. You must create an exception.
- Search for "Firewall & network protection" in the Start menu.
- Click on "Allow an app through firewall".
- Click "Change settings" (requires Admin).
- Find
clash-verge.exeor the Mihomo core binary in the list. Ensure both Private and Public boxes are checked. - If it's not in the list, click "Allow another app..." and browse to the installation folder.
Security Tip
Only allow LAN sharing on networks you trust (e.g., "Private" profile). Using this on a "Public" network profile can expose your PC to other users on the same Wi-Fi.
4Configuring Other Devices (Clients)
Now that the host is ready, you need to point your other devices to the host PC's IP and Port.
For iOS (iPhone/iPad)
- Go to Settings > Wi-Fi.
- Tap the "i" icon next to your connected network.
- Scroll to the bottom and tap Configure Proxy.
- Select Manual.
- Enter your PC's IP (e.g.,
192.168.1.10) in the Server field. - Enter
7890in the Port field.
For Android
- Go to Settings > Network & Internet > Wi-Fi.
- Long-press your network name and select Modify Network.
- Expand Advanced options and set Proxy to Manual.
- Enter the Hostname (PC IP) and Proxy Port (7890).
Gaming Consoles
For PS5 or Xbox, you can find the proxy settings under "Advanced Network Settings." This is the best way to speed up game downloads or reduce lag in region-locked titles.
5Troubleshooting Common Issues
Sometimes things don't go as planned. Here are the most common reasons why LAN sharing might fail in 2026:
1. The "Connection Timed Out" Error
This is almost always caused by a firewall. Double-check your Windows Firewall or third-party antivirus software (like ESET or Norton). Try disabling the firewall temporarily to confirm if it's the culprit.
2. Wrong IP Address
If your PC reboots, your router might assign it a new IP address (e.g., changing from .10 to .12). If this happens, your phone will lose connection. Solution: Set a "Static IP" for your PC in your router settings.
3. Clash Core Crash
If the Mihomo core isn't running properly, the port won't be open. Check the Logs tab in Clash Verge Rev to ensure there are no "Address already in use" or "Permission denied" errors.
Why Use Clash for Sharing?
While there are many proxy tools available, Clash (especially with the Mihomo core used in Verge Rev) offers significant advantages for LAN sharing compared to traditional VPNs or simple SOCKS5 proxies:
- Rule-Based Intelligence: Your phone doesn't need its own rules. It inherits the complex routing logic of your PC. For example, your phone's Netflix traffic goes through the proxy, while its local banking app goes direct—automatically.
- Protocol Support: Clash Verge Rev supports the latest 2026 protocols like Hysteria2 and Reality, which are much faster and more reliable than the aging protocols used by standard VPN apps.
- Centralized Management: You only need to update your subscription and node list in one place (your PC). All connected devices benefit immediately.
In conclusion, setting up LAN sharing turns your powerful desktop setup into a versatile network hub. Whether you are a gamer looking for lower ping or a professional needing seamless access across multiple mobile devices, Clash Verge Rev is the ultimate tool for the job.