Clash Verge Rev Windows 10 Install: Easy Setup Guide

Clash Verge Rev on Windows 10: What to Expect

Clash Verge Rev is a desktop interface for the Mihomo proxy core. It gives Windows users a visual way to manage subscription profiles, proxy nodes, routing rules, DNS behavior, and system-wide proxy settings without manually editing every connection in the operating system. This makes it useful for both first-time users and experienced users who need more control than a basic VPN application provides.

This guide explains how to install Clash Verge Rev on a Windows 10 computer from a clean starting point. You will learn how to choose the correct installer, respond to Windows security warnings, complete the first launch, add a subscription profile, select a usable node, and verify that traffic is being routed as expected. The process applies to most modern 64-bit Windows 10 computers, including desktop PCs and laptops.

It is important to understand that Clash Verge Rev is a client application, not a proxy service. Installing it gives you the software, but you still need a valid subscription or configuration file from a proxy provider. A client without a profile may open normally while having no usable server or rule group to connect to.

1Check Windows 10 Requirements Before Downloading

Checking a few basic details before downloading prevents many installation problems. Clash Verge Rev is generally intended for modern desktop editions of Windows, and most Windows 10 machines use the x64 architecture. However, older computers and some special devices may use ARM64, so it is worth confirming rather than guessing.

Confirm the Windows edition and architecture

Press Windows + I to open Settings, then select System and About. Look for the System type entry. If it says “64-bit operating system, x64-based processor,” download the x64 installer. If it identifies an ARM-based processor, use an ARM64 build when one is available. The installer architecture should match the operating system and processor as closely as possible.

You should also install pending Windows updates and restart the computer if Windows requests it. An outdated system may still run the client, but missing runtime components, security updates, or driver changes can interfere with TUN mode and network adapter installation later.

Running two proxy clients at the same time is a common source of confusion. They may compete for the same local ports, change the Windows proxy switch repeatedly, or install overlapping virtual adapters. If another client is active, exit it from the system tray before beginning the first Clash Verge Rev test.

2Download and Install Clash Verge Rev

Always obtain the installer from a trustworthy official project release page or a verified distribution source. Avoid random download portals that repackage desktop applications, add advertising software, or provide outdated builds. You can visit the Clash Download Page to find the appropriate Windows package and compare the available architectures.

Choose the correct Windows package

For a normal Intel or AMD Windows 10 computer, choose the x64 installer, usually provided as an .exe file. A portable archive may also be available, but an installer is usually easier for beginners because it creates shortcuts and registers the application more consistently. Choose ARM64 only when the computer actually uses an ARM processor.

After downloading, open File Explorer and go to the Downloads folder. Check the file name and extension before launching it. If the browser shows an incomplete download or the file has an unexpected extension, delete it and download the package again from a trusted source.

Handling the “Windows protected your PC” message

Windows SmartScreen may display a message saying that it prevented an unrecognized app from starting. This does not automatically mean that the file is malicious. SmartScreen may warn when an application has limited reputation, has recently changed its signing information, or is not widely downloaded. Do not bypass the warning blindly. First confirm that the installer came from the expected official source and that the file name and publisher information look correct.

If you have verified the source, select More info in the SmartScreen window. Windows may then reveal the application name and provide a Run anyway button. Select it only after checking the details. If the publisher is unknown, the file was obtained from an unofficial mirror, or your antivirus reports a specific threat, cancel the installation and obtain a clean copy instead.

3Complete the First Launch and Basic Settings

When Clash Verge Rev opens for the first time, Windows may display a firewall prompt. The application needs local network access to provide its dashboard and accept traffic from the local machine. If you trust the installation and use the client on private networks, allowing access on private networks is normally appropriate. Avoid granting public-network access unless you understand why it is needed.

The client may start in the system tray rather than opening a large window. Look near the clock on the Windows taskbar and select the hidden-icons arrow if you do not see it immediately. Right-click the Clash Verge Rev tray icon to open the main window, change the system proxy state, or exit the application completely.

Understand the main areas

The exact interface can vary between releases, but the main concepts remain similar. Profiles stores local and remote configurations. Proxies displays proxy nodes and policy groups. Connections shows current traffic sessions. Rules helps you understand how domains and IP addresses are being routed. Settings contains startup, system proxy, DNS, core, and TUN-related options.

Do not enable every advanced feature immediately. A simple first test is easier to troubleshoot. Start with a profile, select a node, enable the system proxy, and test a browser. TUN mode can be enabled later when you need applications that do not respect the Windows system proxy.

4Add a Subscription and Select a Proxy Node

A subscription URL normally contains a provider’s server list, proxy parameters, and policy groups. It is different from the website account password, and it should be treated as private information. Anyone who obtains the URL may be able to use the associated service or consume your traffic allowance, so do not post it in screenshots, public forums, or support chats.

Add a remote subscription

1. Open Clash Verge Rev and go to the Profiles section.
2. Find the field for a remote profile or subscription URL.
3. Paste the complete URL supplied by your provider.
4. Give the profile a recognizable name if the interface allows you to do so.
5. Select Import, Download, or the equivalent action.
6. Wait for the download and parsing process to finish, then activate the new profile.

If your provider gives you a local YAML file instead, use the local profile import option. Keep a backup of the original file before editing it. YAML is indentation-sensitive, so replacing spaces with tabs or deleting a colon can make the profile invalid.

Select a group and node

After activating the profile, open the Proxies page. You may see policy groups such as “Proxy,” “Auto,” “Fallback,” or a provider-specific group. Select a group first, then choose an individual node inside that group. A node with low latency is not always the best option; stability, packet loss, and the destination service also matter.

Once a node is selected, turn on the System Proxy switch in Clash Verge Rev. This usually updates the Windows proxy settings automatically. Open a new browser tab and test a website that can display your public IP address. The result should match the selected proxy location when the site is reached through the proxy.

5Verify Routing, DNS, and Application Behavior

A successful installation is not the same as a successful connection. The application can be open while the profile is invalid, no node is selected, or the browser is bypassing the system proxy. Use several checks rather than relying on one page load.

Run a basic browser test

First confirm that the system proxy switch is enabled. Open a fresh private browser window to avoid cached sessions and visit a normal HTTPS website. Then use an IP-checking service to compare the visible public IP before and after enabling Clash. The address should change if the tested traffic is routed through the selected node.

Next, open the Connections view in Clash Verge Rev while loading a few pages. You should see domains and connection states appear. A connection marked DIRECT is going straight to the internet, while a connection associated with a proxy policy is being handled by the selected node. The exact labels depend on the profile rules.

Understand DNS and TUN mode

DNS behavior depends on the imported configuration. Some profiles use normal DNS resolution, while others use fake-IP or enhanced DNS modes. If websites load slowly, domains fail to resolve, or applications show inconsistent locations, review the profile’s DNS section instead of changing many settings at once.

System proxy mode covers applications that respect Windows proxy settings, including many browsers and desktop tools. Some games, command-line programs, launchers, and background services do not use those settings. For those applications, a properly configured TUN mode may be necessary. TUN mode creates a virtual network interface and captures more traffic, but it may require administrator permission and can conflict with other VPN drivers.

6Fix Common Windows 10 Installation Problems

Most first-day problems fall into a small number of categories. The fastest approach is to change one variable at a time and test again. Avoid importing several different profiles or enabling TUN mode before confirming that the basic client and system proxy work.

The installer will not open

Check whether Windows has quarantined the file, whether the download completed correctly, and whether your account has permission to install applications. Right-click the file and inspect its properties for an unblock option if Windows has marked it as downloaded from the internet. If antivirus software identifies a real threat rather than a reputation warning, do not force the installation; obtain a fresh copy from a trusted source.

The profile fails to import

A subscription URL may be expired, copied incompletely, restricted by the provider, or returning an HTML login page instead of YAML data. Re-copy the full URL and check whether it works in a normal browser request. If the provider requires authentication or has reached a traffic quota, contact the provider. For a local file, inspect the YAML indentation and make sure the file includes the required proxy and rule sections.

The client is open but the browser has no connection

Confirm that a node is selected and that the node itself is reachable. Test a different node, then check whether another VPN or proxy application is still active. Also inspect Windows Settings under Network & Internet and Proxy to see whether an old manual proxy server is overriding the client. Restarting Clash Verge Rev after closing competing network tools often clears a stale port or proxy state.

TUN mode causes conflicts

Disable other VPN clients and virtual network adapters before enabling TUN mode. If the computer loses connectivity, turn TUN mode off, restore the system proxy state, and restart the client. Security software, corporate endpoint controls, and virtualization tools can also interfere with virtual adapters. On managed work computers, ask the administrator before installing network drivers.

Frequently Asked Questions

Does Clash Verge Rev include free proxy servers?

No. Clash Verge Rev is a client and management interface. It does not automatically provide a subscription, server account, or guaranteed internet access. You need a compatible profile from a service provider or a configuration that you create and maintain yourself.

Which installer should I use on a normal Windows 10 laptop?

Most Intel and AMD Windows 10 laptops use the x64 installer. Confirm the architecture in Settings under System and About before downloading. ARM64 devices require an ARM64 build when available, while portable packages are useful only if you specifically need a non-installed version.

Why does the browser still show my original IP address?

The system proxy may be disabled, no node may be selected, or the browser may be using a separate proxy configuration. Check the System Proxy switch, inspect the Connections page while loading a new tab, and close other proxy software. Also remember that rules may intentionally send some domains through DIRECT.

Should I enable TUN mode immediately?

Usually not. Begin with system proxy mode because it is easier to verify and troubleshoot. Enable TUN mode only when you need to capture applications that ignore Windows proxy settings. Before doing so, close other VPN clients and confirm that you have administrator permission.